Brass Laser Cutting & Fabrication in Singapore
Laser cutting and engraving for brass panels, nameplates and custom parts. Send your drawing, quantity and surface finish requirements.
Cutting, engraving
& finishing
Profiles, mounting holes, lettering and surface finishes to suit your drawing.
- Shape
- Outline, mounting holes, slots and bends.
- Mark
- Text, logo, serial number or panel legend.
- Finish
- Brushed, polished, coated or left bare.
Brass panels & components
Brass is used for equipment faceplates, identification plates and decorative details. We review the grade, thickness and finish with your drawing.
For cutting and marking considerations, see our brass cutting and engraving guide.
Nameplates & labels
Equipment labels, branding plates and serial-number tags, with fixing holes and engraved text or logos.
Panels & faceplates
Instrument openings, button holes and fixing points, with panel legends positioned to match the installed components.
Custom components
Flat or formed parts with holes, slots and contact areas. Material grades grade and any electrical contact requirements.
Decorative details
Cut-out panels, trim details and visible plates with specified brush direction, polished faces or other finishing requirements.
Brass grades for sheet
and machined parts
Specify the full grade, standard, temper and thickness. Material availability and any proposed substitution are confirmed with the quotation.
| Material family | Typical selection reason | Details to specify |
|---|---|---|
| UNS C26000 / JIS C2600 | Cartridge-brass designations associated with sheet and formed parts. | Material standard, temper, thickness and bend radius. |
| JIS C2680, C2720, C2801 | Brass sheet and plate grades encountered in Singapore supply catalogues. | Exact grade, temper, thickness and finish. |
| UNS C36000 / JIS C3604 | Free-cutting brass designations relevant to machined features and bar-stock components. | Stock form, machining details and material restrictions. Not a default choice for tight sheet-metal bends. |
Lead restrictions: UNS C36000 contains lead. Include any restricted-substance requirements and material declarations with your enquiry.
For folded parts, include the inside bend radius. For machined features, send a STEP model and a dimensioned drawing.
Cutting & secondary operations
The process sequence depends on the required dimensions, engraving and final finish.
Profiles & openings
Cut outlines, holes and slots from brass sheet. Achievable features and tolerances depend on grade, thickness and geometry; mark critical dimensions and the required burr side on the drawing.
Sheet metal cutting →Bends & features
Formed parts are reviewed for bend radius and material condition. Threads, countersinks and close-fit holes may need drilling, tapping or machining, subject to quotation.
Bending requirements →Text & marking
Engrave text, logos and serial numbers from approved artwork. For a specified contrast or readable code, agree a sample on the actual grade and finish.
Engraving & marking →Edges & surfaces
Deburr edges and finish the specified faces. Plating and protective coatings are subject to confirmation; the quotation identifies any specialist work.
Finishing options →Brushed, polished
or coated brass
Mark the visible face and brush direction. For matching parts, provide a finish sample or a clear appearance specification.
- Brushed
- Specify grain direction and which adjacent parts must match. Identify holes and edges where finishing must not change the geometry.
- Polished
- Agree gloss, visible-face quality and treatment of corners. Heavy polishing can round edges or affect fine engraved detail.
- Plated or protected
- State coating type, thickness where relevant, masking and final dimensions. Confirm whether marking should remain in the coating or reach the substrate.
- Bare brass
- Bare brass can tarnish with handling and exposure. Specify protection or a coating if colour retention is important.
Indoor & outdoor use
Tell us whether the part is used indoors, outdoors or near the coast, and which cleaning agents it will encounter.
Outdoor and coastal applications need grade-specific corrosion and protection review. General-purpose brass should not be assumed suitable for seawater exposure.
For Singapore delivery, include the required date and packaging instructions. Visible faces can require individual protection.
Drawing notes
- Front and rear faces, installed orientation and grain direction.
- Permitted handling marks and any protected or no-clamp areas.
- Mounting holes, countersinks, threads and close-fit dimensions.
- Marking content, size, position and approved artwork revision.
- Contact areas or masked regions that must remain uncoated.
- Final inspection condition: after cutting, forming or finishing.
Agree cosmetic acceptance against a sample or stated viewing conditions. For dimensional checks, see our quality assurance approach.
Compare other materials
Copper
For parts where electrical conductivity or heat transfer is the main requirement.
Copper processing guide →Stainless steel
For silver-coloured panels and components with grade-specific corrosion and cleaning requirements.
Stainless steel capability →Aluminium
For lightweight panels and covers, with anodised or coated finish options.
Aluminium capability →Request a brass parts quote
Send the drawing, quantity and finish requirements.
- Material & quantityFull grade, standard, temper, thickness, batch quantity and repeat demand. State whether material is supplied by you or included in the quote.
- Drawing & revisionDXF for the outline, STEP for formed or machined geometry, and a dimensioned PDF. Identify the governing document if files differ.
- Marking & artworkVector logo, text, font or outlined lettering, serial data and position. Confirm whether each part carries identical or variable information.
- Finish & protectionVisible face, brush direction, polish or coating, masking, film and packaging. Include an approved sample if appearance matching is required.
- Inspection & documentsCritical dimensions, cosmetic acceptance, material declarations and report requirements. State any restricted substances or customer-specific specifications.
- DeliverySingapore receiving location and requested date. Material procurement, first-off approval and specialist finishes can affect the confirmed schedule.
Brass fabrication questions
Which brass grade should I specify for a panel?
Specify the full grade, standard and temper. Selection depends on thickness, bending and finish requirements; availability is confirmed with the quotation.
Is C360 the best choice for every brass part?
No. C36000 is a leaded free-cutting brass suited to machining, rather than a default choice for folded sheet. Include any material restrictions in the enquiry.
Can cutting and engraving be included in one order?
Yes, send the part drawing and marking layout together. A sample may be needed to confirm contrast or appearance before production.
Will polished brass remain the same colour?
Bare brass can tarnish. If colour retention matters, specify the service environment and discuss a protective finish.
Can all holes be used directly after laser cutting?
Clearance holes may be suitable as cut, but threads, countersinks and tight fits may need secondary processing. State the feature tolerance, burr requirements and function so the route can be assessed.
Are plating and specialist machining carried out in-house?
Plating and specialist machining are confirmed per project. The quotation identifies the included operations and any work arranged externally.
Related capabilities
Enquire about brass parts
Send your drawing and quantity for a quotation.